The file 'DIN-Rail Adapter For Homematic IP Flush Mounted Actuators HMIP-FSM, HMIP-FSM116, HMIP-FROLL, HMIP-FBL 3D Printer Model' is (STEP,STL) file type, size is 149.3KB.
As there's no DIN-Rail actuator available which support power measurement, HMIP-DRSI1 is far too expensive for its little set of features ant there's also no single channel shutter actuator, i needed to use the flush-mouinted actuators in the cabinet.
First I printed some DIN-Adaptersfor Shellys and fixed the actuators with double sided tape - not really convinient, as I found no suitable model for free.
There's a guy who sells a printed adaptor, but shipping was too expensive, model not really what I liked and he rejected to sell the model to me to print myself.
So I decided to design my own and share to the community.
This one fits for all actuators from Homematic IP, is 35mm wide which eaquals 2 moduls.
Height is compareable to standard RCDs and circuit-brakers,
Terminals are accessible in mounted condition for HMIP-FSM, but not for HMIP-FROLL and HMIP-FBL - these nieed to be cabled prior monting. Space for cabling is enough.
| HMIP-FSM_single.STEP | 496.8KB | |
| HMIP-FSM_single.STL | 189.8KB |
![Knifey [Toy Story] 3D Printer Model](https://cdn.3axis.co/assets/fb/32/6e/80/fb326e80-7e1a-4646-a4b9-22c62237b718/images/b45604ac-2887-4383-9a78-b2b3a2a2b28c_thumb.jpg)
