Dillon XL 650 Powder Funnel 3D Printer Model
The file 'Dillon XL 650 Powder Funnel 3D Printer Model' is (STL) file type, size is 1.4MB.
The file 'Dillon XL 650 Powder Funnel 3D Printer Model' is (STL) file type, size is 1.4MB.
Powder funnel options for manual powder charged on the Dillon XL650. Options for fitting in station 2 or 3 with clearance for a sizing die, bullet feeder, and primer tube. Use with the standard Dillon powder die and insert. Set the height so that when the ram is at the top of the stroke, the printed funnel is slightly lifted by the die insert. This avoids a gap and potential spillage.
Print upside down with no supports for best internal surface.
| Creedmoor_Funnel_Short_and_Big.STL | 709.3KB | |
| Creedmoor_Funnel_Short_and_BigV2.STL | 1.3MB | |
| Creedmoor_Funnel_Short_and_BigV3.STL | 772.2KB | |
| Creedmoor_Funnel_Tall.STL | 717.7KB |
