Digital Clock 3D Printer Model
The file 'Digital Clock 3D Printer Model' is (stl) file type, size is 2.4KB.
The file 'Digital Clock 3D Printer Model' is (stl) file type, size is 2.4KB.
This is a digital clock enclosure for a Max7219 4x8x8 dot matrix. In this project I combined it with a Wemos D1 Mini, but other micro controllers can also be used with this case as their is more room than required in the enclosure.
I personally designed this as a clock that works on WiFi to show the correct time. This is of course not a requirement for it to work.
This enclosure could also be used as just a way to enclose a Max7219 display with a micro controller to be used for different means than a clock.
A NodeMCU or an Arduino Nano with ESP8266 shield can also be used.
The lid provides a small hole for easy installation of a reset button for the micro controller.
I printed with 40% infill on both the enclosure as the lid for added strength (since the walls are not that thick) I think it would still work perfectly with a smaller amount of infill.
Please let me know if you like it or your feedback!
CODE: https://drive.google.com/open?id=1cBPUl9tztSOoEt1IL99C2vWOICdgKlcq
(Developed for Wemos D1 Mini)
| case.stl | 7.7KB | |
| lid.stl | 3.8KB |
