DigiPi Dock For Icom IC-705 3D Printer Model
The file 'DigiPi Dock For Icom IC-705 3D Printer Model' is (stl) file type, size is 439.6KB.
The file 'DigiPi Dock For Icom IC-705 3D Printer Model' is (stl) file type, size is 439.6KB.
Dock for the Icom IC-705 which includes space for the DigiPi. (Raspberry Pi Zero). Raspberry Pi Zero and 1.3 inch integrated 1.3" display.
I have created 2 additional versions with more internal space for wiring, you might go for this version which makes manual handeling more easy.
Added a dummy display cover fur usage without display.
There are integrated supports in the model, after printing you can remove them with a small tong.
Please don't print with supports!!
When you like this model please don't forget to like this model.
You can find more information about the DigiPi here: https://www.youtube.com/channel/UC0xIV_cFUMBxjaoBWwGNzAQ
https://discord.com/channels/911715364050726982/911723861282807838
Display used for this project: https://nl.aliexpress.com/item/1005001685654439.html?gatewayAdapt=glo2nld&spm=a2g0o.cart.0.0.635e3c00a04HbO&mp=1
I had some questions wetter all wires were needed dir the display. As far as I know a couple are not used, the information is in this document: https://cdn-learn.adafruit.com/downloads/pdf/adafruit-mini-pitft-135x240-color-tft-add-on-for-raspberry-pi.pdf If there is anybody who has sorted this out please let me know and I will make a picture explaining this.
73' PD1MV
| ic-705-model_Aditional_version_extra_space.stl | 460.2KB | |
| ic-705-model_display.stl | 37.3KB | |
| ic-705-model_dummy_display.stl | 35.9KB | |
| ic-705-model_extra_space_fully_open.stl | 459.3KB | |
| ic-705-model_raspi-fix1.stl | 1.3KB | |
| ic-705-model_raspi-fix1b.stl | 1.1KB | |
| ic-705-model_raspi-fix2.stl | 1.4KB | |
| ic-705-model_Rev3.stl | 349.7KB |
