Diesel Loco For 16mm Scale Garden Railway 3D Printer Model
The file 'Diesel Loco For 16mm Scale Garden Railway 3D Printer Model' is (stl,pdf) file type, size is 8.0 MB.
The file 'Diesel Loco For 16mm Scale Garden Railway 3D Printer Model' is (stl,pdf) file type, size is 8.0 MB.
A Diesel Loco for your Garden Railway 32mm or 45mm gauge.
This is not the easiest model to print, you need support on some objekts and a well calibrated printer, but it is printable on a budget printer.
You can make the loco as a display Model or you can equip it with a motor and R/C gear for you garden railroad.
It is perfect for Kitbashing your own loco if you want to do that.
A PDF Manual is included.
The Loco on all pictures are printed with 0,2 mm layer height and 20 % infill.
All STL files are checked with Netfabb and test printed on 3 different printers
2017-09-23
Fixes some errors on frame_2.stl , it was still printable on most printers, but this file should be even easier to print , old version removed and the new version is frame_2_v2.stl
2018-04-16
A new version off Frame_1b is released, this version are more rigid than the original file,
I will leave the original file but i recommend you to use "Frame_1b_V2", If you use your own chassie then it is faster to print the original file.
| cab_1a.stl |
| cab_1b.stl |
| cab_2.stl |
| cab_3.stl |
| clear_glass.stl |
| engine.stl |
| frame_1a.stl |
| frame_1b.stl |
| frame_1b_V2.stl |
| frame_2_V2.stl |
| hood_1.stl |
| hood_2.stl |
| hood_3a.stl |
| hood_3b.stl |
| Instructions.pdf |
