This DT has a simply cubic design, with 3 ramps inside, it's a little bit like the brutalism style in the architecture. It's designed for using XL dices (my 8-sided XL-dice doesn't fit in standard dice towers) or playing some dices at the same time. The tower can also be downscaled to smaller dimensions for a single standard dice...
I tested some different dices and a few of lighter models are sometimes falling out over the front, so I made the walls 10mm higher, this files are descripted "with higher walls" in the file name. So better print the version with higher walls, please. I also designed a separate attachment to raise the wall for the versions without higher walls - it's the black part in one of the images, it fits well..
The dice tower can be printed with or without a round base, you will need about 91m PLA and 5,5h for the model without base and 6,5h and 102m PLA for the one with base.
| dice_tower_box.stl | 7.5KB | |
| dice_tower_box_with_higher_walls.stl | 7.9KB | |
| dice_tower_box_with_ring.stl | 26.6KB | |
| dice_tower_box_with_ring_and_higher_walls.stl | 27.0KB | |
| dice_tower_edge_v3.stl | 5.7KB |
