Dice Tower With Secret Chamber For Dice Storage II 3D Printer Model
The file 'Dice Tower With Secret Chamber For Dice Storage II 3D Printer Model' is (STL) file type, size is 3.6MB.
The file 'Dice Tower With Secret Chamber For Dice Storage II 3D Printer Model' is (STL) file type, size is 3.6MB.
This is a revision on my original dice tower (http://www.thingiverse.com/thing:1762997)
I added the gate per a request. I made it sliding optional for ease of printing. If it won't slide easily, the secret door should still work. I already made the original so I don't know if I'll get around to printing this version.
UPDATE: 1/4/17 - I just got around to checking this out for printing and noticed I messed up the tower interior. So I have corrected it and added a version that supports the arches.
UPDATE: 1/8/17 - I got it all printed and mostly sanded down and put together. The gate needs a filler panel to prevent it from getting stuck up inside the walls with nothing to grab and pull it back down with. I'll try and post a make today, but it'll probably be next weekend before I can get it painted. I've add a gatefiller file with both 15mm and 20mm tall plates to glue in over the gate. I think I'll end up with the 15, but some people may want the extra grip on the gate to pull it back down.
UPDATE: 1/17/2017
Pu1p made a flagpole for the secret door switch. Check it out: http://www.thingiverse.com/thing:2043609
UPDATE: 01/22/2020
I was made aware today that I screwed up the tower track on this version. I added a fixfor the short track trapdoor and re-uploaded corrected towers (v3). Sorry to anyone who had any issues with this. I must have accidentally deleted something when I made the v2 files.
| DICE_TOWER_II_v3_Blank_Shield.STL | 628.8KB | |
| DICE_TOWER_II_v3_No_Shield.STL | 618.3KB | |
| DICE_TOWER_II_v3_No_Support.STL | 1.1MB | |
| DICE_TOWER_II_v3_Support.STL | 1.2MB | |
| drawbridgeV3.STL | 90.0KB | |
| drawbridgeV4.STL | 95.1KB | |
| Gate.STL | 71.2KB | |
| Gatefillers.STL | 1.3KB | |
| TrapDoorv3.STL | 1.4MB | |
| TrapDoor_ShortTrackFix.STL | 1.4MB | |
| turret.STL | 1.5MB | |
| turret_V2.STL | 1.6MB |
