Dice Tower III – Long Snout 3D Printer Model
The file 'Dice Tower III – Long Snout 3D Printer Model' is (STL) file type, size is 3.8MB.
The file 'Dice Tower III – Long Snout 3D Printer Model' is (STL) file type, size is 3.8MB.
I've been meaning to get around to this for along time. The biggest complaint for the original dice towers (I & II) was the short drawbridge height would allow the dice to jump out.
So I made two versions (Long Snouts) with an extra 10 or 20mm length on the nose and drawbridge height.
There are shield and shieldless versions, blank shield, support, ect. This is currently only the version with the gate. I'll try to add an updated original tower soon.
UPDATE: 1/24/2020
Just added pictures of the 20mm Long Snout vs the original tower I made. Much better design and the dice will have a hard time jumping out now.
| DICE_TOWER_III_10mm_LongSnout.STL | 1.1MB | |
| DICE_TOWER_III_10mm_LS_Blank_Shield.STL | 625.8KB | |
| DICE_TOWER_III_10mm_LS_No_Shield.STL | 615.1KB | |
| DICE_TOWER_III_10mm_LS_Support.STL | 1.2MB | |
| DICE_TOWER_III_20mm_LongSnout.STL | 1.1MB | |
| DICE_TOWER_III_20mm_LS_Blank_Shield.STL | 620.9KB | |
| DICE_TOWER_III_20mm_LS_No_Shield.STL | 610.6KB | |
| DICE_TOWER_III_20mm_LS_Support.STL | 1.2MB | |
| DrawBridgeV5_10mm_LS.STL | 183.0KB | |
| DrawBridgeV5_20mm_LS.STL | 181.5KB | |
| Gate.STL | 71.2KB | |
| Gatefillers.STL | 1.3KB | |
| TrapDoorv3.STL | 1.4MB | |
| turret_V2.STL | 1.6MB |
