This model is based on the work by Mag-net (https://www.thingiverse.com/thing:3251834), modified to work as a dice tower.
I removed the front door and the two pillars at the entrance to clear the path for the dice.
I also added some slants under the side windows to help print for printers with not-so-good part cooling.
This model is scaled to 140% of the base model so dice can fit nicely - this was tested with slightly large d6 and regular d20 dice.
Recommend using support blockers everywhere but underneath the balconies, see pictures for a better idea. DO NOT use supports on the stairs!
| Gringotts_DiceTower_V6_140.stl | 3.3MB |
