Hello,

I have made Dice Tower for hiding bluetooth speaker Lamax Musican1 on our tabletop gaming table. Any speaker can be fitted inside, max dimensions are 75mm diameter, 204mm height.

Print of the dice tower is supportless. Even so, I recommend you to use supports due possible issues on other/bottom side of steps (depends how good/calibrated your printer is, the slope is 45 dgr).

I have used some dice bowl and surface model from Thingiverse which I mixed together (Dice_tray.stl) It's optional part but I recomend it, if you do not like having dice all over the table. This part is supportless. Here are both links,I did not make that, I take no credit from those models:

https://www.thingiverse.com/thing:1789000
https://www.thingiverse.com/thing:3035873

"Attach_bottom_dice_tower.stl" is also an optional part. It can be used as an anchor for the Dice Tower when glued to Dice Bowl (or any other pad). In my case I have glued this part into the middle of the dice bowl and attached Dice Tower on it for improving stability and for preventing the movement.

I have figured out that the dice tend to jump over the wall of the Dice Bowl if too much force is used (or if the dice is too light..) so I have made a fence which can be attached to the wall of the dice bowl (fence.stl). Again optional. And suportless

At the end I have used the cannon from existing thingiverse model and I have added a platform under it so it can be fitted on the top of the tower. This part needs to be printed with supports. Again no credit, I did not make the cannon, here is a link:
https://www.thingiverse.com/thing:2496707