Dialga- 3D Print Ready 3D Printer Model
The file 'Dialga- 3D Print Ready 3D Printer Model' is (stl) file type, size is 398.69 KB.
The file 'Dialga- 3D Print Ready 3D Printer Model' is (stl) file type, size is 398.69 KB.
This is marked as a WIP only because I want to eventually slice it up to work with smaller printers, right now I have an all nighter put into this and have to take a break.
This is so far my hardest one to overcome, as far as going back into blender and redoing portions of the model to be able to be printed, but I really, REALLY wanted a Dialga so I stuck with it.
Sad part is this is about as small as it gets. The back piece is just too thin to print smaller and if I thicken it anymore it will get ride of some of the detail.
Some may rather loose the detail and print smaller. I guess just let me know and I may work on another for those individuals.
Besides Darkrai this is one of my favorite Pokemon. So I am eager to print this and really eager to see other people print theirs.
Good Luck and happy printing!
EDIT:
Sep-9-18
-Sliced the model into smaller segments, added alignment pins.
Pins are made with a 0.1mm tolerance, if there is an issue, the alignment holes are 7mmX10mmX11mm Elliptical Cylinders, if you wish to make your own.
Still keeping this a WIP until I get the opportunity to print the model. The printer I was going to use is in the process of getting it's hot-end replaced, so I'll get to it as soon as that is done.
Sep-18-18
Legal
I do not claim ownership of the original model and belongs to The Pokémon Company.
These are just me changing the models in order to be 3D print friendly.
| Dialga.stl |
| DialgaAlignmentPin.stl |
| DialgaBody.stl |
| DialgaFLLeg.stl |
| DialgaFRLeg.stl |
| DialgaHead.stl |
| DialgaRLLeg.stl |
| DialgaRRLeg.stl |
| DialgaTail.stl |
