Hear yee, hear yee!! This is my latest goodie for group consumption! (though don't eat it, that'd be weird)

This is a 12 unit, 6 size parts organizer. I came up with the idea to store my zip-ties (or zap straps, whatever you yourself may call them)... but they'd also be great for dowels or anything else one might like. The boxes themselves are labelled by their height, in millimeters and inches.

With several mounting options: Side-wall mount. End-wall mount, or desktop. As seen in the pics, the mounting holes are on two sides to facilitate your options. The 3 holes on the BACK are 150mm (6") apart, across and vertically, for easy location. The 4 holes on the SIDE are 150mm (6") apart vertically and 50mm (2") apart horizontally.

The front and back walls are 4mm thick, the sides and partitions are 2mm. I would opt to print this upside down and on an angle to increase the bias, but your milage may vary.

The whole thing 200mm (8") long at the base, and 100mm (4") wide, 200mm tall (8").

I used orcaslier to do mine, where I printed on the 220mm x 220mm bed of my Kobra Neo, the stats were as follows:

Filament length: 142m
Filament Mass: 423.52g
Total Time 14h6m

3 wall loops
3 top shell
3 bottom shell
3% gyroid
0.32 layer height
0.3 first layer
wipe on
no ironing
no fuzzy
0.2, 2 layers elephent foot
5mm inner/outer skirt
0.175mm skirt-object gap
combination infill