**Note: There are now 5 inner diameter options available for Version 3!!! Now all options include 1.25"ID, 1.5"ID, 1.75"ID, 2"ID, 2.25"ID, and 2.5"ID. IMPORTANT: THE 1.25"ID AND 1.5"ID DUST SHOE OPTIONS USE THE STANDARD VINYL RING. THE 1.75"-2.5"ID OPTIONS USE THE 2.5"ID VINYL RING.
**Note: Just Released Version 3! The Dust Shoe is now larger in front to keep the vinyl from being sucked in to the vacuum and it also clips into the lock position so that it cannot come off the router while cutting. The vinyl is also now easier to attach with small screws.
This is a Dust Shoe attachment for the X-Carve equipped with the DeWalt DWP611 Router. It utilizes the large threads on the router to thread on for a snug fit. The Button Extension allows the button to still be fully capable, allowing for easy bit changing. The Dust Shoe slides up and over to lock into the threaded ring which also makes it easy to remove quickly.
https://www.youtube.com/watch?v=WSTQvpl5DmM
https://www.youtube.com/watch?v=23h_vzlpNBI
https://www.youtube.com/watch?v=wUG8xO19Yq0
| 1.5ID_Dewalt_DWP611_Vacuum_mount_V3.stl | 305.4KB | |
| 1.75ID_Dewalt_DWP611_Vacuum_mount_V3.stl | 311.9KB | |
| 2.0ID_Dewalt_DWP611_Vacuum_mount_V3.stl | 320.7KB | |
| 2.25ID_Dewalt_DWP611_Vacuum_mount_V3.stl | 781.5KB | |
| 2.5ID_Dewalt_DWP611_Vacuum_mount_V3.ipt | 2.2MB | |
| 2.5ID_Dewalt_DWP611_Vacuum_mount_V3.stp | 3.6MB | |
| 2.5ID_Dust_Shoe_Dewalt_DWP611_Vacuum_mount_V3.stl | 338.8KB | |
| 2.5ID_Vinyl_Ring_Dewalt_DWP611_Vacuum_mount_V3.stl | 122.9KB | |
| Dewalt_DWP611_Dust_Shoe.stl | 229.5KB | |
| Dewalt_DWP611_Dust_Shoe_Button_Extension.stl | 92.1KB | |
| Dewalt_DWP611_Vacuum_mount_ring.stl | 296.2KB | |
| Dewalt_DWP611_Vacuum_mount_V3.ipt | 2.3MB | |
| Dewalt_DWP611_Vacuum_mount_V3.stp | 3.6MB | |
| Dust_Shoe_Dewalt_DWP611_Vacuum_mount_V3.stl | 300.4KB | |
| Threaded_Ring_Dewalt_DWP611_Vacuum_mount_V3.stl | 306.1KB | |
| Vinyl_Ring_Dewalt_DWP611_Vacuum_mount_V3.stl | 125.7KB |
