Dewalt 20V & Milwakee M18 Portable Battery Soldering Iron 3D Printer Model
The file 'Dewalt 20V & Milwakee M18 Portable Battery Soldering Iron 3D Printer Model' is (stp,stl) file type, size is 490.5KB.
The file 'Dewalt 20V & Milwakee M18 Portable Battery Soldering Iron 3D Printer Model' is (stp,stl) file type, size is 490.5KB.
One body uses a regular 20x15mm switch the other body is 16mm latching switch.
https://leeselectronic.com/en/product/312731-vandal-push-button-spst-on-off-16mm-solder-terminal.html
the spade terminals i used were 7.8mm quick connectors. https://leeselectronic.com/en/product/170473-quick-connector-male-non-insulated-78mm-10-pkg.html
I had to give the spade connectors a small haircut. I heated it up as i slid it into the slot and then crazy glued it in place. It appears to work but unsure if its stable for long term use.
Multiple different faceplates for different soldering station types. Step file is included if you want to modify the face.
i printed it with the back side on the build plate and printed it with no supports.
| M18_Soldering_Iron.stp | 479.6KB | |
| M18_Soldering_Iron_faceplate.stl | 24.5KB | |
| M18_Soldering_Iron_faceplate.stp | 39.7KB | |
| M18_Soldering_Iron_faceplate_STC_t12_quicko_non_lcd_display.stl | 44.2KB | |
| M18_Soldering_Iron_faceplate_STC_t12_quicko_non_lcd_display.stp | 68.6KB | |
| M18_Soldering_Iron_faceplate_STC_t12_quicko_oled_display.stl | 45.8KB | |
| M18_Soldering_Iron_Round_power_hole.stl | 152.0KB | |
| M18_Soldering_Iron_square_power.stp | 479.4KB | |
| M18_Soldering_Iron_square_power_hole.stp.stl | 427.6KB |
