Detachable Screw On Unicorn Horns 3D Printer Model
The file 'Detachable Screw On Unicorn Horns 3D Printer Model' is (stl) file type, size is 2.7MB.
The file 'Detachable Screw On Unicorn Horns 3D Printer Model' is (stl) file type, size is 2.7MB.
There are 3 files:
UnicornHorn.stl
This is the long horn. If you plan to put this on a child's beanie/head garment, you risk poking your eye out each time you pick your little one up. They also become walking hazards while wearing the horn. I would not recommend putting this on a child's garment. This horn requires no supports.
UnicornHornSafe.stl
This is the little horn. I made this as it is safer for young children to wear. If you decide to print it out of brown PLA, it may end up looking more like a turd than a horn. This horn requires supports.
UnicornHornBase.stl
This is the base that fits on both horns. Just slide the screw part through the back of the fabric (or whatever else you want to put a horn on) and screw the horn onto it. No supports needed for printing.
The horns are shown screwed onto a beanie that was crocheted with chunky yarn, so there is plenty of space for the screw part to pass through each stitch without damaging the fabric.
| UnicornHorn.stl | 3.0MB | |
| UnicornHornBase.stl | 237.6KB | |
| UnicornHornSafe.stl | 3.2MB |
