This is one of my favorite Robot Architectures. Maybe not perfect (see below).
I have been wanting to build this one. Here it is !
Notes on Building:
Its based upon the Meccano Parts - see links below.
Its Walking capability is handicapped - 3 Legs is not a stable solution for its broad center of balance. It would fallover easily trying to walk ... Four Legs would be a lot better. I have the correctly built Architecture on one of my 100 of Robots on the shelves.
-> Fourth Image has a new friend visitor.
Have Fun !
Obviously, erector parts (including #6 Screws or 3mmx10mm bolts and nuts) are needed to build this Model with these printed parts.
May want to refer to :
-> Meccano Base Parts Plates Struts Angles
-> Millenium Falcon Star Wars Meccano Expansion
for more Parts.
| DD_ARMgun_Droid_Jnt1_53x8x8_146.stl | 12.5KB | |
| DD_ARM_Droid_Jnt2_33x8x8_140.stl | 15.5KB | |
| DD_BACKBONE_Droid_Jnt2_69x29x20_142.stl | 51.4KB | |
| DD_BELLY_Droid_Jnt2_53x19x20_143.stl | 30.4KB | |
| DD_BRACE_Droid_Jnt2_24x8x10_139.stl | 12.0KB | |
| DD_BRACE_Droid_Jnt3_36x8x10_138.stl | 18.1KB | |
| DD_HEAD_Droid_Jnt1_40x16x20_144.stl | 28.0KB | |
| DD_LEGjntLower_DroidSqr_TipCone_med_48x12x12_135a.stl | 22.3KB | |
| DD_LEGjntUpper_DroidSqr_18x8x8_133b.stl | 6.8KB | |
| DD_LEGjntUpper_DroidSqr_38x8x8_136a.stl | 6.5KB | |
| DD_SHOULDER_Droid_Jnt2_16x18x20_141.stl | 22.8KB | |
| DD_TORSOtee_Droid_Jnt2_18x8x10_145a.stl | 15.4KB | |
| M1_DOMEHemiSphere_4x4a2_20x40x40_p054a.stl | 265.6KB | |
| M1_Strip_2x1x0_20x10x2_p045a.stl | 5.7KB |
