Destiny 2: Hissing Silence Ghost Shell 3D Printer Model
The file 'Destiny 2: Hissing Silence Ghost Shell 3D Printer Model' is (stl) file type, size is 20.9MB.
The file 'Destiny 2: Hissing Silence Ghost Shell 3D Printer Model' is (stl) file type, size is 20.9MB.
It's the Hissing Silence Shell from Destiny 2, now fully printable!
All pieces are intended to be press- or snap-fit; you should be able to assemble the ghost without glue. Be careful of tolerances if scaling up or down. The central core rotates freely within the clamshell; if you don't like that, you can add some tape rolls between the core and the clamshell walls, where they are not visible from the outside.
Holds an LED tea light to make the ghost's display glow. When assembling the ghost, mate the bottom of the post on the "knob" piece with the straight bar in the center of the LED's back. You can then rotate the knob to turn the light on and off without taking the model apart. Works with these LED lights (choose "flower shape"): https://www.ebay.com/itm/171239692713?_trksid=p2059210.m2749.l2649&var=470455566681&ssPageName=STRK%3AMEBIDX%3AIT
For a complete model, print:
hsgs_winglet_curve_a in Color A (4x)
hsgs_winglet_curve_b in Color A (4x)
hsgs_winglet_curve_c in Color B (4x)
hsgs_case_a_holes in Color B (2x)
hsgs_case_a_pegs in Color B (2x)
hsgs_case_b_holes in Color B (2x)
hsgs_case_b_pegs in Color B (2x)
hsgs_fins in Color B (2x)
sphere_pegs in Color B (1x)
sphere_holes in Color B (1x)
knob in Color B (1x)
sphere_ins_a or sphere_ins_b (1x) in Black
For a "traditional" Hissing Silence Shell like the one in the game, Color A should be White, Color B should be Black, and the LED should be Blue.
See the "Print Settings" module for important printing hints.
| hsgs_case_a_holes.stl | 533.4KB | |
| hsgs_case_a_pegs.stl | 533.4KB | |
| hsgs_case_b_holes.stl | 4.0MB | |
| hsgs_case_b_pegs.stl | 3.3MB | |
| hsgs_fins.stl | 1.3MB | |
| hsgs_winglet_curve_a.stl | 7.5MB | |
| hsgs_winglet_curve_b.stl | 2.3MB | |
| hsgs_winglet_curve_c.stl | 809.3KB | |
| knob.stl | 1.6MB | |
| sphere_holes.stl | 13.4MB | |
| sphere_ins_a.stl | 450.3KB | |
| sphere_ins_b.stl | 454.8KB | |
| sphere_pegs.stl | 9.6MB |
