Desktop Organizer – Pencil Holder – Various Models – Part Two 3D Printer Model
The file 'Desktop Organizer – Pencil Holder – Various Models – Part Two 3D Printer Model' is (STL) file type, size is 2.2MB.
The file 'Desktop Organizer – Pencil Holder – Various Models – Part Two 3D Printer Model' is (STL) file type, size is 2.2MB.
Update: Added a new model V2a Like V2 it fits pencils with a diameter up to 12,5 mm and 9x9 cm notepads.
Update: Added a new model V2. It fits pencils with a diameter up to 12,5 mm and 9x9 cm notepads.
V1 and V1a fit pens up to 11 mm in diameter and 9x9 cm notepads.
V1 and V1a are redesigns of my own design https://www.thingiverse.com/thing:4860899. Other new designs may follow.
The side panel is now designed as a separate part. It is therefore printed separately and then screwed to the base with three M3 screws. This makes it much more stable. Even if it does break, it can simply be replaced without having to print the entire base again. There is also a second side panel that can be used to extend the base. You then only need longer screws.
V1a corresponds to V1 only without the SD card slots. The same side panels are used for this as for V1.
Additional parts required:
3x M3x15 mm countersunk screws (M3x30 for two side panels)
3x M3 nuts
I have not test printed the parts. Therefore, I cannot say with certainty whether everything works.
| Organizer_V1.STL | 1.4MB | |
| Organizer_V1a.STL | 1.4MB | |
| Sidepanel_01.STL | 95.0KB | |
| Sidepanel_02.STL | 101.6KB | |
| V2.STL | 1.6MB | |
| V2a.STL | 1.6MB |
