This could be a remix but I can't point to multiple origins and I designed all from scratch. However I tried several designs which just were not THE thing for me ;) Especially connections were not the dovetail which I happen to like.
Inspirational thanks and credits for seeding my thoughts will go to
I wanted to make modular, stackable interlocking system with some extras. Also wanted to make it relatively easy to print.
Module size is 40x40x80mm. (M in STL-names, so 2M is 40mm high-80mm wide-80mm deep)
You have different drawers for every module size (1M, 2M, 3M)
Single drawers, divided 50-50 or even 4x25.
One 1M drawer is for SD cards.
(I printed and colored SD card from Ubergeekking https://www.thingiverse.com/thing:710938 and glued that to SD drawer)
On top you can print a pencil/tool holder (1M, 40mm deep with 8 holes)
On the finishing line I decided to make optional holders for labels. Those are just glued to drawer with SuperGlue.
You can use optional legs if you wish. Those will give a small opening under the storage and help also using bottom drawer handles. I fastened storage system to my table with some blue-tac, there's a small cavity under the leg.
| Drawer_1M.stl | 4.4KB | |
| Drawer_1M_50-50.stl | 5.2KB | |
| Drawer_2M.stl | 4.4KB | |
| Drawer_2M_4_25.stl | 6.7KB | |
| Drawer_2M_50-50.stl | 5.2KB | |
| Drawer_3M.stl | 4.4KB | |
| Drawer_3M_50-50.stl | 5.2KB | |
| Frame_1M.stl | 8.3KB | |
| Frame_2M.stl | 10.6KB | |
| Frame_3M.stl | 13.0KB | |
| Label_M1.stl | 4.4KB | |
| Label_M2.stl | 4.4KB | |
| Label_M3.stl | 4.4KB | |
| Leg_L.stl | 26.1KB | |
| Leg_R.stl | 26.1KB | |
| Pencil_holder_1M.stl | 15.5KB |
