Found I needed a stand for the mobile while video conferencing, but the stand I had was a little too small for the weight of the phone.
The result is something which is substantial enough to also be able to hold a tablet/ iPad. It features a backplate which helps stop the phone from falling down the back.
It comprises 5 parts, held together by 3x sets of M3 nuts, bolts and spring washers. Total printing time is just over 7 hours, if using the gcode files provided.
| All_3_Pillars_Shortened_0.2mm_PLA_MK3_3h32m.gcode | 6.1MB | |
| Backplate.stl | 1.7MB | |
| Backplate_0.2mm_PLA_MK3_1h37m.gcode | 2.7MB | |
| Backplate__Middle_Pillar.stl | 2.2MB | |
| Backplate__Middle_Pillar_0.2mm_PLA_MK3_2h41m.gcode | 4.3MB | |
| Left_Pillar.stl | 317.0KB | |
| Left_Pillar_0.2mm_PLA_MK3_1h10m.gcode | 1.8MB | |
| Left_Pillar_Shortened.stl | 342.4KB | |
| Left_Pillar_Shortened_0.2mm_PLA_MK3_1h9m.gcode | 2.0MB | |
| Middle_Pillar.stl | 521.6KB | |
| Middle_Pillar_0.2mm_PLA_MK3_1h10m.gcode | 1.8MB | |
| Middle_Pillar_Shortened.stl | 375.5KB | |
| Middle_Pillar_Shortened_0.2mm_PLA_MK3_1h1m.gcode | 1.9MB | |
| Rest_Left__Right_Pillars.stl | 1.1MB | |
| Rest_Left__Right_Pillars_0.2mm_PLA_MK3_4h14m.gcode | 7.3MB | |
| Rest_Piece.stl | 475.4KB | |
| Rest_Piece_-_15mm_Deep.stl | 462.1KB | |
| Rest_Piece_-_15mm_Deep_0.2mm_PLA_MK3_2h35m.gcode | 5.3MB | |
| Rest_Piece_-_17mm_Deep.stl | 409.5KB | |
| Rest_Piece_-_17mm_Deep_0.2mm_PLA_MK3_2h26m.gcode | 4.8MB | |
| Rest_Piece_0.2mm_PLA_MK3_2h3m.gcode | 3.9MB | |
| Right_Pillar.stl | 314.8KB | |
| Right_Pillar_0.2mm_PLA_MK3_1h10m.gcode | 1.9MB | |
| Right_Pillar_Shortened.stl | 340.0KB | |
| Right_Pillar_Shortened_0.2mm_PLA_MK3_1h9m.gcode | 2.0MB |
