This is a small desktop vise I designed for a project and for personal use.
At full scale it is about 6 x 4" and has 2.75" of travel.
You will need a 6" 3/8" fully threaded bolt, (2) 3/8" nuts, and I used (2) metal washers with (2) Nylon washers against the vise base.
The nut for the slide along with the knob will need to be glued. I also chose to lock in the back nut with glue so it does not come loose.
I have included the files for a replaceable grooved block and a blank block.
I printed mine with PLA at 30% infill and 1.6mm wall thickness
| Base.rsdoc | 213.0KB | |
| Base.stl | 979.5KB | |
| Vise_block_blank.rsdoc | 33.2KB | |
| Vise_block_blank.stl | 1.4KB | |
| Vise_Block_Grooved.rsdoc | 120.9KB | |
| Vise_Block_Grooved.stl | 9.1KB | |
| Vise_knob.rsdoc | 318.7KB | |
| Vise_knob.stl | 2.9MB | |
| Vise_Slide.rsdoc | 132.5KB | |
| Vise_Slide.stl | 58.6KB |
