Just another Desk Stand for four or eight MAX7219 Modules with a small case behind to mount a MH-ET LIVE. If it does not fit just rasp the board edges a little bit.
The MH-ET can be powered from the left or right side with an USB cable.
But the cable needs to have a small plug.
If you have four MAX7219 on one board with more than 0.5mm space between each of them they will not fit! Got that with my newly ordered boards...
Total length of ~129.5mm will fit. Those Boards with ~132mm won´t fit.
I had to saw them apart and created the mounting_aid (stl) to fit them individual. Have fun soldering them together again... The edge version is for the edges.
| desk-case-lid.stl | 124.5KB | |
| desk-case-stand.stl | 374.7KB | |
| max7219-case-wide.stl | 1.0MB | |
| max7219-case.stl | 774.3KB | |
| max7219-mounting_aid.stl | 249.9KB | |
| max7219-mounting_aid_edges.stl | 220.2KB |
