I needed a desk lamp...I thought and decided to make a lamp on the street lamp.
What do you need for this?
3D printing file:
BottomCover.stl x1
SupportRight.stl x1
SupportLeft.stl x1
Box.stl x1
Electronic Component:
Arduino nano or promini x1 ---- https://www.kisa.link/NsuY or https://www.kisa.link/Nsv0
Arduino Touch Control Sheild x1---- https://www.kisa.link/Nsv2
Lipo Battery (im used 18650) x1 ---- https://www.kisa.link/Nsv3
Lipo Barrety Charger Module x1 ---- https://www.kisa.link/Nsv5 (you need to remove the socket)
2222a Transistor x1 ---- https://www.kisa.link/Nsv6
22 ohm 0.5w resistor x1 ---- https://www.kisa.link/Nsvj
1Kohm resistor x1 ---- https://www.kisa.link/Nsv9
1w Power Led
Usb socket type B x1 --- (I took off a damaged circuit)
On off switch --- https://www.kisa.link/Nsvz
Somewhat circuit board and some cable
Any one question pls write me : [email protected]
| Arduino_Code.txt | 524.0B | |
| BottomCover.STL | 41.2KB | |
| Box.STL | 360.1KB | |
| LightHead.STL | 789.9KB | |
| SupportLeft.STL | 101.7KB | |
| SupportRight.STL | 100.5KB |
