I designed this bird feeder to sit on a flat surface, or on a post, or hung in a tree.
simply print the top and bottom as illustrated , and glue them together.
I made the feeder ring out of TPU so that it could be removed to clean
the bottom part does not need supports, but the top needs supports to the build plate
If anybody has a too tight fit between the top and bottom parts due to differences in printer tolerances then you can simply dremmel out the hole a little so that they fit easier together.
if you print this design then could you please take the time to post your makes, i would really appreciate it.
| bird_feeder_base.stl | 64.9KB | |
| bird_feeder_roof_bigger_holes.stl | 131.6KB | |
| TPU_feeder_ring.stl | 25.1KB |
