I made derailleur wheels for bearings (UPDATE)
10 teeth - Race:
D8 = with standard bus (8/5/9 mm) without bearing (use original metal caps and bus)
D16 = bearing 688 (16/8/5 mm)
D17 = bearing 606 (17/6/6 mm)
D19 = bearing 607-RS (19/7/6 mm) = copy like Tacx pulley gears
D22 = bearing 608 (22/8/7 mm) = (outer diam / inner diam / thickness)
11 teeth - MTB - mountain bike
D22 = bearing 608 (22/8/7 mm) = (outer diam / inner diam / thickness)
13 teeth - MTB - mountain bike
D8 = with standard bus (8/5/8 mm) without bearing (use original metal caps and bus)
D19 = bearing 607-(19/7/6 mm)
15 teeth - MTB - mountain bike
D8 = with standard bus (8/5/10 mm) without bearing (use original metal caps and bus)
D19 = bearing 607-(19/7/6 mm)
You can also print the corresponding caps
If you have other bearings let me know
Updated D8 + D19: a bit thinner teeth to fit smaller chains
Updated D16 + added D17
Added MTB 13T-D8 and MTB 15T-D8 without bearings
| MTB_15+13T+C.pdf | 185.0KB | |
| MTB_D19_caps.stl | 217.9KB | |
| MTB_T11-D22.stl | 170.2KB | |
| MTB_T13-D19.stl | 211.2KB | |
| MTB_T13-D8.stl | 269.2KB | |
| MTB_T13-D8C.stl | 269.1KB | |
| MTB_T15-D19.stl | 212.0KB | |
| MTB_T15-D8.stl | 276.1KB | |
| MTB_T15-D8C.stl | 281.9KB | |
| Race_D16_caps.stl | 131.3KB | |
| Race_D17_caps.stl | 137.7KB | |
| Race_D19_caps.stl | 137.0KB | |
| Race_D22_caps.stl | 128.6KB | |
| Race_T10-D19.stl | 205.3KB | |
| Race_T10_D16.stl | 198.1KB | |
| Race_T10_D17.stl | 200.5KB | |
| Race_T10_D22.stl | 167.3KB | |
| Race_T10_D8.stl | 259.8KB |
