Denix AK47 Immitation Rifle Modding Kit 3D Printer Model
The file 'Denix AK47 Immitation Rifle Modding Kit 3D Printer Model' is (stl,lnk,txt) file type, size is 256.1KB.
The file 'Denix AK47 Immitation Rifle Modding Kit 3D Printer Model' is (stl,lnk,txt) file type, size is 256.1KB.
Print all items at 50% scale.
'T-Jig-1' is for cutting the dust cover
'Pilot_Guide3_stl' is for aligning the pilot bit on an annular cutter
'5-8-ver2' is you 5/8X24 TPI UNEF Thread Alignment Tool (TAT)
'1 thru 6' are you WASR-63 stencils for 7mm wood
'AK47_bolt_handle' is for the charging handle extension
Recommended infill 95-100%
| 1.stl | 63.9KB | |
| 2.stl | 81.6KB | |
| 3.stl | 66.3KB | |
| 4.stl | 62.1KB | |
| 5.stl | 53.8KB | |
| 6.stl | 31.4KB | |
| 8-ver2.stl | 274.4KB | |
| AK47_bolt_handle.stl.lnk | 804.0B | |
| Pilot_Guide3_stl.stl | 39.4KB | |
| Pilot_Guide4_stl.stl | 70.0KB | |
| README.txt | 355.0B | |
| T-Jig-1.stl | 3.6KB |
