Demon Skull (updated V3) 3D Printer Model
The file 'Demon Skull (updated V3) 3D Printer Model' is (stl) file type, size is 45.0 MB.
The file 'Demon Skull (updated V3) 3D Printer Model' is (stl) file type, size is 45.0 MB.
I'm printing a bunch of these to give away on halloween, along with the candy. Last year I didn't buy enough candy, so three little ghosts left empty-handed (but were too well behaved to egg my door). I still feel a bit guilty about that.
This is not an easy print, unless you cut the parts in creative ways and glue the pieces. See example in cut_pieces_X.stl.
Modelled in Pixologic Sculptris.
UPDATE 2018-10-15: I added a larger, more detailed version and fused the mandible & skull. Print the whole thing (demon_skull_v2.stl) or use the pre-cut parts (demon_skull_v2_back.stl & demon_skull_v2_front.stl). The large skull in the photo is printed in 0.3 mm, 15% infill, with supports, and put together with 6 x 30 mm dowel pins.
UPDATE 2019-03-13: Seems I can't stop playing around with this model, so here's version 3.
| cut_pieces_horns.stl |
| cut_pieces_nohorns.stl |
| demon_skull_v2.stl |
| demon_skull_v2_back.stl |
| demon_skull_v2_front.stl |
| demon_skull_v3.stl |
| mandible.stl |
| skull_horns.stl |
| skull_nohorns.stl |
