Demon Skull Glow 3D Printer Model
The file 'Demon Skull Glow 3D Printer Model' is (stl) file type, size is 12.0MB.
The file 'Demon Skull Glow 3D Printer Model' is (stl) file type, size is 12.0MB.
Sorry in advanced for the Poor Chop Shop Job, I use Free Tinker CAD and there is only so much you can do. I wasn’t sure originally if I was going to hang on the wall or build something for the yard so there are a few option connectors for the back of the head. I ended up taking the head off my old Skeleton and putting this one on in its place. I made it in a few parts to cut down on one long print time. There are connectors you can use to put it together with Glue but Warning the ones I made are tight so you might want to make something a little looser. For the Cap of the head, I used .071 X 0.12 Inch Disc Magnets on the top and bottom so I can put a glowing light in the skull, they fit tight, so I did not need Glue to hold them in place. I am a big fan of using a soldering tool to close gaps instead of Glue but watch out if you do it stinks, and I am sure breathing in the smoke is horrible for you. This is chopped together with other people’s designs so thank you to the original creators of this Frankenstein parts skull
| Horn_Tip_Left.stl | 661.8KB | |
| Horn_Tip_Right.stl | 661.0KB | |
| Optinal_Plug.stl | 137.4KB | |
| Option_PVC_connector.stl | 62.6KB | |
| Option_Skeleton_Body_connection.stl | 91.2KB | |
| Skull_Lower.stl | 2.5MB | |
| Skull_Middle_Back.stl | 4.5MB | |
| Skull_MIddle_Front.stl | 15.3MB | |
| Skull_Top.stl | 3.4MB |
