Delta IV Heavy 3D Printer Model
The file 'Delta IV Heavy 3D Printer Model' is (stl) file type, size is 1.5MB.
The file 'Delta IV Heavy 3D Printer Model' is (stl) file type, size is 1.5MB.
You may need to increase/decrease the scale of the attach pins depending on your printer so it attaches good between the cores and the upper-stage/nosecones.
NEED TO PRINT: Delta IV Heavy CBC (1), Side Booster (2), DCSS (1), Attach Pegs (3)
If you decide to print with supports, make sure you block-out in your 3D-Printing software so it doesn't print supports for the attach peg holes!
Use BRIMS and not rafts if possible!!!
PRINT THE CORES WITH THE ENGINES FACING UP!!!!!!!!!
| Delta_IV_attach_peg.stl | 81.9KB | |
| Delta_IV_CBC.stl | 1.7MB | |
| Delta_IV_DCSS.stl | 1.8MB | |
| Delta_IV_Heavy_Side_Booster.stl | 3.5MB |
