I designed this as a foot for the corners of a friend's Delta. Worked out great. He glued a rubber washer to the underside of his, so I made a second model with an indentation for a rubber washer. The indentation 26mm diameter, and 1mm deep indentation just to help retain what ever piece of rubber (or flex filament) you decide to glue in there. I'd recommend a 1 inch by 3/8ths rubber washer but no guarantees that that will be perfect. I printed it in the other orientation previously, but I think this orientation will work out better. Overall, it gives 13.5mm of extra height to the printer. It has a slot for the V-rail, and takes two M4x10mm bolts and square nuts per foot. It also gives a nice concealing shell for wires to feed down the tubes of the extrusions for the top or the bottom of the printer if you're into that sort of thing.
I hope you enjoy them!
| Corner_Foot.stl | 425.7KB | |
| Corner_Foot_With_Indent.stl | 524.6KB |
