Dell R710/610 SFF Drive Tray 3D Printer Model
The file 'Dell R710/610 SFF Drive Tray 3D Printer Model' is (f3d,stl) file type, size is 147.4KB.
The file 'Dell R710/610 SFF Drive Tray 3D Printer Model' is (f3d,stl) file type, size is 147.4KB.
Ready to assemble Dell SFF Drive tray.
Everything was printed with 20% infill with basic settings using PLA. Modeled from the ground up using a Dell OEM drive tray.
The handle is plenty strong and allows you to pull the drive in and out easily. One rail does have a cut out so the drive can slide all the way into the back plane. All you need are 4 screws just about any should work. The handle/connector is a tight fit into the two side rails which give it some extra strength.
I had some of these laying around from a different project: http://www.ebay.com/itm/-/180999268972
| dell_sff_tray.f3d | 66.9KB | |
| left_rail.stl | 42.3KB | |
| left_rail_multiple.stl | 126.6KB | |
| rail_connector.stl | 15.5KB | |
| rail_connector_multiple.stl | 46.4KB | |
| right_rail.stl | 43.3KB | |
| right_rail_multiple.stl | 129.9KB |
