Dell Optiplex 9020 4-SSD Drive Bay 3D Printer Model
The file 'Dell Optiplex 9020 4-SSD Drive Bay 3D Printer Model' is (stl) file type, size is 73.0KB.
The file 'Dell Optiplex 9020 4-SSD Drive Bay 3D Printer Model' is (stl) file type, size is 73.0KB.
I made this SSD bracket in order to install 4 laptop SSD's into my Optiplex, that I just happened to have laying around from other projects.
The uploaded version is the final result after a couple of prototypes, so it should fit in like a glove.
I designed it with the original locking mechanism in mind (you can transfer the blue piece from the metal bracket to this one), but I didn't necessarily fine-tune this area too much, so expect it to not be a 100% fit.
In my case, it locked about half-way, just enough to keep the bracket from coming loose, so I called it good.
(Also, since I used SSDs, I really wasn't concerned about vibrations or whatnot).
Enjoy!
| Optiplex_Drive_Bay.stl | 347.6KB |
