DEERC 9200E Wheelie Bar 3D Printer Model
The file 'DEERC 9200E Wheelie Bar 3D Printer Model' is (stl,FCStd) file type, size is 1.1MB.
The file 'DEERC 9200E Wheelie Bar 3D Printer Model' is (stl,FCStd) file type, size is 1.1MB.
This is a wheelie bar for the DEERC 9200E. The car can generate enough torque to flip itself on to its back if you accelerate too quickly. This bar prevents it from flipping.
I printed the whole thing at 15% infill except for the wheels which were printed at 100% infill. The wheels also have a 3mm hole so you can slide in a M3 bar as an axle (optional).
There's a grove on either side of the bracket for fixing to the car with a cable tie, alternatively you can screw it to the chasis using the existing screws which align with the mounting holes.
You need to print 1 x bracket, 2 x arms, and 2 x wheels (either design).
| wheelie_bar-arm.stl | 75.3KB | |
| wheelie_bar-bracket.stl | 301.7KB | |
| wheelie_bar-wheel-2.stl | 1.0MB | |
| wheelie_bar-wheel.stl | 1.2MB | |
| wheelie_bar.FCStd | 193.1KB |
