Deep Dive Crankbait 3D Printer Model
The file 'Deep Dive Crankbait 3D Printer Model' is (stl) file type, size is 3.4MB.
The file 'Deep Dive Crankbait 3D Printer Model' is (stl) file type, size is 3.4MB.
Inspired by: https://www.thingiverse.com/thing:2463713
I re-designed the whole thing from scratch, so measurements will differ, i also taylored it to materials i use for the hook hangers ect.
Main changes are that the sides are now truly flat wich makes for minimal work in cleaning layerlines.
The belly takes 12 0.4gr lead BBs, treble hooks and split rings should be the same as in the original since size roughly matches.
I also added creases in the back in the hope to improve the action a bit.
The bait dives fast and deep, has a wonderful action to it and makes quite a lot of pressure in the water, so it should be very nice to convince predators to attack it!
| Flat_Side_Crankbait_Left.stl | 2.0MB | |
| Flat_Side_Crankbait_Left_WITH_EYE.stl | 2.1MB | |
| Flat_Side_Crankbait_Lip.stl | 45.0KB | |
| Flat_Side_Crankbait_Right.stl | 2.0MB | |
| Flat_Side_Crankbait_Right_WITH_EYE.stl | 2.1MB |
