Deej Enclosure 3D Printer Model
The file 'Deej Enclosure 3D Printer Model' is (stl) file type, size is 20.3KB.
The file 'Deej Enclosure 3D Printer Model' is (stl) file type, size is 20.3KB.
This is for the Deej slider project. this was designed to have the plates pressure fit into the body without glue or screws.
the lower plate uses 4 brass flange inserts with measurements of M3xL3.5xOD4.6 and they had 3mm LEDs slightly screwed into them to get them to stay.
the knobs on the top I used have a measurement of 30mm x 10mm.
the screen used is a 0.91 inch OLED module
the knobs in the picture were used from https://www.thingiverse.com/thing:4197611 by aithorn
| deej_body_finalized.stl | 43.1KB | |
| deej_bottom_plate.stl | 27.2KB | |
| deej_updated_topshelf_.stl | 17.3KB |
