Deej Audio Mixer 3D Printer Model
The file 'Deej Audio Mixer 3D Printer Model' is (stl) file type, size is 1.3MB.
The file 'Deej Audio Mixer 3D Printer Model' is (stl) file type, size is 1.3MB.
Welcome all,
Please see my version of enclosure for Deej.
I have created two versions, 6 sliders with 3 buttons and 5 sliders with 2 buttons.
I've used B103 model with 10k Ohm resistance. Dimensions 75x9x6. Make sure they are linear!
To mount top part I've used 4x M3x12 bolts with brass inserts
I map buttons to F13-F16 to be able assign them without conflits with for example Push-to-talk.
I printed with PLA.
Also attached photos of the process and print.
Top is printed with top surface up and with supports below.
Bottom has supports only in the inserts where feet go
Other parts had no supports
If you like my design, any tip is appreciated!
Feel free to comment and ask questions!
| 5Slide-BottomV1.stl | 856.8KB | |
| 5Slide-TopV1.stl | 820.1KB | |
| 6Slide-BottomV1.stl | 604.9KB | |
| 6Slide-TopV1.stl | 897.2KB | |
| FeetV1.stl | 691.1KB | |
| InsertBrowser.stl | 281.1KB | |
| InsertDiscord.stl | 71.0KB | |
| InsertGame.stl | 84.7KB | |
| InsertMain.stl | 128.4KB | |
| InsertMic.stl | 130.9KB | |
| InsertMusic.stl | 77.0KB | |
| KeycapSlotV1.stl | 510.5KB | |
| Knobv1.stl | 533.7KB |
