Decorative Shelf 3D Printer Model
The file 'Decorative Shelf 3D Printer Model' is (stl) file type, size is 1.0MB.
The file 'Decorative Shelf 3D Printer Model' is (stl) file type, size is 1.0MB.
The top measures approximately 6" X 9" and will just fit flat onto a stock FlashForge Creator Pro (MakerBot) platform. There are three interchangeable front panels that will fit onto the front of the shelf, each with a unique design. You can print the one that you like. I put holes in the shelf to mitigate warping but it's good to ensure the design is sticking well before you let it go on too long. There are two small holes in the back to facilitate hanging the shelf with small nails. I got the best print when I didn't use a raft and printed the first layer at 40% speed, 180% width and 90% height.
| Bird_Plate.stl | 651.6KB | |
| Designer_Shelf_V14.2.stl | 822.0KB | |
| Feline_Plate.stl | 945.2KB | |
| Marine_Plate.stl | 1.9MB |
