Decorative Base "Flat Stone" 2 In 1 Set 3D Printer Model
The file 'Decorative Base "Flat Stone" 2 In 1 Set 3D Printer Model' is (stl) file type, size is 20.3MB.
The file 'Decorative Base "Flat Stone" 2 In 1 Set 3D Printer Model' is (stl) file type, size is 20.3MB.
There is a 30% discount on STL files for all Patrons of the DakkaDakka store on Patreon. Check out this months release patreon.com/dakkadakkastore
The Decorative base "Flat stone" 2 in 1 Set consists of 4 STL files with 60mm base with a cutout for a 25mm base, which can be used separately.
2 versions of files are included: pre-supported and unsupported. Scaled for 28 mm tabletop.
All parts have been prepared and tested for 3D printing. We recommend to print in resin.
These models are designed by dakkadakka.store. Miniatures for tabletop games and collecting.
The models are not intended for commercial use. All rights reserved.
Be sure to follow us on Instagram @dakkadakka.store to not miss any updates!
Print Settings
Notes:
for units:
layer height - 0.03mm
exposure time - 3 sec
For vehicles and terrain:
layer height - 0.05mm
exposure time - 4 sec
| flat-stone-2in1-flat-stone-25x25-cutout-sup.stl | 4.0MB | |
| flat-stone-2in1-flat-stone-25x25-cutout.stl | 704.5KB | |
| flat-stone-2in1-flat-stone-60x60-cutout-sup.stl | 21.1MB | |
| flat-stone-2in1-flat-stone-60x60-cutout.stl | 9.6MB |
