This is a copy of my publication at Printables
Use your imagination and make beautiful decorations with these thin leafy twigs.
Very thin print, to approach the real leaves as much as possible.
With a little imagination you can even turn it into a hanging plant (see photos).
Printed with 0.4mm nozzle, layerheigth 0.2.
The veins of the leaves are at the top layer. I printed them with silver grey. For the leaves I used emerald green with small glitters in it (not exaggerated) for the slightly shiny effect.
For information on how to shape these twigs after printing (use also twisting!), I refer you to my other published model: Snowflake Garlands (2.8m long!). There I described in detail the way to do this with hot water.
p.s. this only works with PLA, as it has the property of softening below 100°C (212°F).
The hanging plant is displayed in my Display Cube with Floating Shelf
Background Coverimage by pvproductions on Freepik
| Leaf_1_String_B.stl | 1.9MB | |
| Leaf_2_String.stl | 994.1KB |
