Deck Box With Commander Display And Magnetic Sliding Lid 3D Printer Model
The file 'Deck Box With Commander Display And Magnetic Sliding Lid 3D Printer Model' is (stl) file type, size is 235.4KB.
The file 'Deck Box With Commander Display And Magnetic Sliding Lid 3D Printer Model' is (stl) file type, size is 235.4KB.
Deck box with room for 100 single sleeved (I'm using Dragon Shield) plus a small stack of tokens, likely able to fit double sleeved as well but I don't have any to test.
Edges are rounded on the outside, has a nice "feel" when holding from the top or sides due to deep recesses in side panels.
Commander is displayed on the front of the box in a toploader.
Lid locks easily with 4x2mm magnets (https://www.amazon.com/dp/B0BW976MJV?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1). I cleaned up the magnet holes by lightly reaming the holes with a 5/32" drill bit (4mm would be ideal but I didn't have one), and then press fit, no glue necessary.
Optimized to print with no supports.
| Deck_Box_Combined_Mag-lock_4x2mm.stl | 318.9KB | |
| Deck_Box_Lid_Mag-lock_4x2mm.stl | 16.4KB | |
| Deck_Box_Mag-lock_4x2mm.stl | 302.5KB |
