Decent Scale Extension 3D Printer Model
The file 'Decent Scale Extension 3D Printer Model' is (3mf,step,stl) file type, size is 3.7MB.
The file 'Decent Scale Extension 3D Printer Model' is (3mf,step,stl) file type, size is 3.7MB.
I designed this to fit the Decent scale and the Decent Espresso DE1Pro
It keeps the scale tucked under the drip tray but still allows you to use the stop at weight features of the machine. I have my scale plugged in via USB and the tablet controls on/off functionality so I don't have to touch the scale unless I'm refilling water.
I typically pull shots with cups that weigh up to 350g but I also tested two stacked cups (~700g) and the deflection is very minor. You could likely use up to 1kg and still have plenty of clearance between the model and the drip tray.
The images shown have a logo on the front that came out okay, but I've attached the blank version with the step file in case anyone wants to customize their own.
The part can slide left and right so you can flush the group head and have the extension out of the way.
| DecentScaleExt.5.2_Hex_Grid.3mf | 31.5KB | |
| DecentScaleExt.5.2_Hex_Grid.step | 506.5KB | |
| DecentScaleExt.5.2_Hex_Grid.stl | 127.1KB | |
| DecentScaleExt.v4.1_Blank.3mf | 1018.2KB | |
| DecentScaleExt.v4.1_Blank.step | 358.8KB | |
| DecentScaleExt.v4.1_Blank.stl | 4.0MB | |
| DecentScaleExt.v5.2_Circle_Grid.3mf | 1011.8KB | |
| DecentScaleExt.v5.2_Circle_Grid.step | 348.6KB | |
| DecentScaleExt.v5.2_Circle_Grid.stl | 3.9MB |
