Deathstroke Mask Arkham Origins With Back Piece 3D Printer Model
The file 'Deathstroke Mask Arkham Origins With Back Piece 3D Printer Model' is (stl) file type, size is 74.5MB.
The file 'Deathstroke Mask Arkham Origins With Back Piece 3D Printer Model' is (stl) file type, size is 74.5MB.
Thanks Uncle Jessy:
This is the Deathstroke mask from Arkham Origins. In this remix I added strap holes to the mask and the back piece.
This mask was sized for an adult male. It is 10% larger than the orginal.
Note : If you printed the my original Deathstroke mask this back piece will fit it. You will just need to scale this back piece down 10% from what you printed the original. So if you printed the original at 100% the back piece will need to be printed at 90% to be at the same scale.
| Back_Piece_v2.stl | 8.7MB | |
| Deathstroke_Mask_Mirror_Image_v2.stl | 34.6MB | |
| Deathstroke_Mask_v2.stl | 34.7MB | |
| Deathstroke_Mask_v2_no_strap_holes.stl | 34.3MB | |
| Part_10_v2.stl | 4.3MB | |
| Part_1_v2.stl | 2.6MB | |
| Part_2_v2.stl | 2.4MB | |
| Part_3_v2.stl | 5.0MB | |
| Part_4_v2.stl | 7.8MB | |
| Part_5_v2.stl | 4.1MB | |
| Part_6_v2.stl | 6.2MB | |
| Part_7_v2.stl | 4.1MB | |
| Part_8_v2.stl | 4.1MB | |
| Part_9_v2.stl | 4.5MB |
