CAUTION: When I printed this I forgot to add tolerances so I had to sand the parts so they fit together. Afterwards I added .2mm tolerances for the parts that fit together, but did not print them again, this MAY or MAY NOT be enough for your printer/material, so expect some sanding to make everything fit.
The Star itself if from a lamp like this: https://www.amazon.co.uk/Star-Wars-Rogue-Plastic-colour/dp/B01LW806P1
I changed the stock leds and installed bluetooth-controlled RGB ones:
https://i.imgur.com/6xwPaAh.mp4
I finished the parts with several layers of filler primer and putty and a lot of sanding, and then glued most of it togther and painted it. Trying to finish or paint after building would be a pain.
Some parts need to be printed several times, the name of the file says how many.
| backplatex2.stl | 30.9KB | |
| bottom_a.stl | 251.4KB | |
| bottom_b.stl | 170.0KB | |
| bottom_cover.stl | 271.3KB | |
| bottom_pipe.stl | 2.5MB | |
| button.stl | 68.5KB | |
| core.stl | 773.3KB | |
| core_ring.stl | 201.4KB | |
| core_v1.step | 296.8KB | |
| full.stl | 4.6MB | |
| holoprojector.step | 3.9MB | |
| swich_panel_cover.stl | 38.6KB | |
| switch_panel.stl | 256.5KB | |
| top_panelingx2.stl | 216.9KB | |
| top_ring.stl | 71.6KB | |
| top_shellx3.stl | 26.1KB | |
| tube_addonx4.stl | 157.4KB | |
| tube_addon_bigx4.stl | 157.4KB | |
| vent_grid_addonx2.stl | 139.3KB |
