Death Star Bauble / Box / Keyring… 3D Printer Model
The file 'Death Star Bauble / Box / Keyring… 3D Printer Model' is (stl) file type, size is 76.1MB.
The file 'Death Star Bauble / Box / Keyring… 3D Printer Model' is (stl) file type, size is 76.1MB.
A big set of Death Star models as
It's a redesigned model of my old Death Star Box
Changed texture and UV map and added a lot of different model versions
Texture used (I modified it) is from here
http://3dmoddeling.blogspot.com/2011/12/blog-post_12.html
Model of a box is made of 3 elements - top, bottom and a thread
No glue needed
'For-supp' models will need supports
Thread is in two versions. Use 'thread_lower' if you will have some problems (a big gap between top and bottom parts when assembled) - I used it when printed models with 0.6mm nozzle
There is a bottom model with a thread included - box will be little lighter and easier to use but will need supports
As an example for simple box, printed without supports, use:
deathstar_box_v2_bottom
deathstar_box_v2_THREAD
deathstar_box_v2_top_NO-hole
and an optional - deathstar_v2_stand
Matrioshka was tested with 100%, 75%, 50% boxes (with flat roof) and 25% ball. You can print some more with lower size changes (maybe each 20%)
With round roof (models 'for-supp') there is more space so you can print even more
Models of a box with size of around 50% and less will need 0.1mm layer hight (I printed with 0.2mm and there is a little gap on some layers). Models of a box smaller than 40% may need smaller nozzles (than typical 0.4mm)
Lamp-shade is a ball with cutted off bottom part. You can put it on the electric candle or other light source (no open fire) - as on first photo
Earring, Keyring and a Fridge magnet are with little changed model compared to original.
There is not that much details on them but you can see each section more clearly than on original model resized to the same size
Eggstar Box
More Christmas decorations on my Thingiverse collection
Update 26 IV 2022
Uploaded versions of a stand with domed letters (original are carved)
| deathstar_box_v2_bottom-w-thread.stl | 6.8MB | |
| deathstar_box_v2_bottom-w-thread_flat.stl | 6.1MB | |
| deathstar_box_v2_bottom-w-thread_for-supp.stl | 7.4MB | |
| deathstar_box_v2_bottom.stl | 6.5MB | |
| deathstar_box_v2_bottom_flat.stl | 5.8MB | |
| deathstar_box_v2_bottom_for-supp.stl | 7.1MB | |
| deathstar_box_v2_support-blocker.stl | 1.3MB | |
| deathstar_box_v2_supports.stl | 4.0MB | |
| deathstar_box_v2_THREAD.stl | 906.9KB | |
| deathstar_box_v2_THREAD_lower.stl | 742.0KB | |
| deathstar_box_v2_top.stl | 7.0MB | |
| deathstar_box_v2_top_for-supp.stl | 7.6MB | |
| deathstar_box_v2_top_for-supp_NO-hole.stl | 7.6MB | |
| deathstar_box_v2_top_for-supp_w-ring.stl | 7.7MB | |
| deathstar_box_v2_top_NO-hole.stl | 7.0MB | |
| deathstar_box_v2_top_w-ring.stl | 7.0MB | |
| deathstar_v2_stand-triangle.stl | 856.2KB | |
| deathstar_v2_stand-triangle_domed.stl | 856.5KB | |
| deathstar_v2_stand-triangle_hole.stl | 558.3KB | |
| deathstar_v2_stand-triangle_hole_domed.stl | 558.7KB | |
| deathstar_v2_stand.stl | 3.2MB | |
| deathstar_v2_stand_domed.stl | 3.2MB | |
| deathstar_v2_stand_hole.stl | 520.4KB | |
| deathstar_v2_stand_hole_domed.stl | 520.8KB | |
| death_star_ball_uv2.stl | 8.1MB | |
| death_star_ball_uv2_NO-hole.stl | 8.0MB | |
| death_star_ball_uv2_ring.stl | 8.1MB | |
| death_star_earring.stl | 2.7MB | |
| death_star_keyring.stl | 2.7MB | |
| death_star_lamp-shade.stl | 13.8MB | |
| death_star_magnet.stl | 1.9MB |
