This is a death eater mask cover that fits over the attached mask design with "Imperio" ear saver.

This is a little rough around the edges which I cleaned up post printing.

Version 2 has a sturdier frame for adhering to the front of the mask

I could only edit it in Tinkercad so it's not perfect but the front looks great save for the slight line across the side from connecting the middle and bottom pieces. If you know how to edit designs smoothing out the edges would be really helpful. Remix of : https://www.thingiverse.com/thing:3574691

I've attached the mask and grid that it was designed to fit. The mask and grid are adaptations from other designs that I've used. I'll try to find their links to attach here.

Sizes:
Large: 105%
Medium: 100%
Small : 95%
Youth: 90%

gcodes attached for 8x8x8 printers with single extruder (I use JGMagic Maker and Ender 3)

My Print settings:

Death Eater Cover:
Position - Face up
Supports - 15%, zigzag, do not attach support zigzags, use towers
Layer Height - 0.2 mm
Speed: 60mm/s (30mm/s first layer)
Temp - 220C
Wall Line Count - 3
Infill - 20%
Brim - 5mm

Mask & Grid:
Position: Face down
No supports
Layer Height - 0.25 mm
Speed - 60 mm/s (30mm/s First layer)
Temp - 225
Wall Line count - 4
Skirt - 1 line only