Shutter shades for cats or small dogs. Distance between legs is about 8cm. Should fit people at 2x scaling, but non-hinged legs may be inconvenient. May fit other animals at other scaling factors, but test at your own risk.
Must be printed in original orientation, doesn't require supports. Shutters are 0.4mm thick, 0.4mm tall, and distance between each shutter is 0.6mm. First layer adhesion is crucial.
Note: May need some amount of horizontal expansion in slicer settings for shutter to print correctly, depending on nozzle size.
| shuttershades.stl | 86.4KB |
