Deadpool Coaster
Ready to put a transparent acrylic 88 mm diameter by 1/8 inch thick to complete the coaster
Infill 100%
Deadpool Coaster: (Option 1, Simple Color Layers)
Background Red: 0 to 1.0 mm
Black: 1.0 to 2.0 mm
White: 2.0 to 3.0 mm
Red: 3.0 to 7.2 mm
As you can see in the pictures, I did a lot of work on Cura to create separate G-codes for each component and at the end I was able to print the outer ring in red without crashing with the parts previously printed in my Ender 3.
You can use the included G-codes to print in an Ender 3 (option 2 below)
Deadpool Coaster: (Option 2, Mixed Color Layers)
1 - Red: 0 to 1.0 mm
2 - Black: 1.0 to 2.0 mm
3 – White: 2.0 to 3.0 mm
4 - Red: 1.0 to 7.2 mm
Please send a message or post a comment on how was your experience with the print.
Hope you like it.
Follow the YouTube links below if you want to learn how I do these multicolor prints
Lesson 1 - https://youtu.be/dnlyMpjMM5E
Lesson 2 - https://youtu.be/n9lpa5U8qCA
Lesson 3 - https://youtu.be/iUZ0dpDQ2CQ
Lesson 4 - https://youtu.be/RvfxYRpMTCg
Lesson 5 - https://youtu.be/NBTJK9WJGzY
Lesson 6 - https://youtu.be/CxvVRBh2XUY
Lesson 7 - https://youtu.be/1w0lYBf1ZYY
| 1_Deadpool_Coaster.gcode | 166.5KB | |
| 2_Deadpool_Coaster.gcode | 199.0KB | |
| 3_Deadpool_Coaster.gcode | 77.2KB | |
| 4_Deadpool_Coaster.gcode | 1.4MB | |
| Deadpool_Coaster.stl | 110.6KB | |
| Deadpool_Coaster_Back_Plate.stl | 73.1KB | |
| Deadpool_Coaster_Black.stl | 98.1KB | |
| Deadpool_Coaster_White.stl | 85.6KB | |
| Ring_for_Coaster.stl | 49.5KB |
