D&D Dice Holder And Spell Slot Counter 3D Printer Model
The file 'D&D Dice Holder And Spell Slot Counter 3D Printer Model' is (stl) file type, size is 353.8KB.
The file 'D&D Dice Holder And Spell Slot Counter 3D Printer Model' is (stl) file type, size is 353.8KB.
I designed this box with pull out drawers to keep all of my D&D dice organizer and easy to access. Each drawer fits 15 dice and there is an additional drawer that is used to count spell slots. Each slot corresponds to a coin and when a spell is used the coin is moved to the discard section at the back of the drawer.
The drawers were designed to fit dice that I bought by the pound off amazon. I imagine the dice dimensions are fairly standard and are listed below. Scale the drawers as needed if your dice are a different size.
D4: ~19 mm per side
D6: ~16.5 mm per side
D8: ~18.5 mm per side and ~25 mm tall
D10: ~22.5 mm diameter and ~21.5 mm tall
D12: ~21 mm diameter and 18 mm tall
D20: ~23.5 mm diameter and 20.5 mm tall.
| D10_Drawer.stl | 868.1KB | |
| D12_Drawer.stl | 49.5KB | |
| D20_Drawer.stl | 46.0KB | |
| D4_Drawer.stl | 22.9KB | |
| D6_Drawer.stl | 33.3KB | |
| D8_Drawer.stl | 41.5KB | |
| DnD_Drawer_Holder.stl | 6.9KB | |
| Spell_Counter_1_Coin.stl | 15.7KB | |
| Spell_Counter_2_Coin.stl | 20.8KB | |
| Spell_Counter_3_Coin.stl | 26.1KB | |
| Spell_Counter_4_Coin.stl | 15.5KB | |
| Spell_Counter_5_Coin.stl | 22.0KB | |
| Spell_Counter_6_Coin.stl | 23.1KB | |
| Spell_Counter_7_Coin.stl | 14.9KB | |
| Spell_Counter_8_Coin.stl | 30.7KB | |
| Spell_Counter_9_Coin.stl | 23.1KB | |
| Spell_Counter_Drawer.stl | 190.1KB |
