D&D Ability Tokens 3D Printer Model
The file 'D&D Ability Tokens 3D Printer Model' is (stl) file type, size is 1.3MB.
The file 'D&D Ability Tokens 3D Printer Model' is (stl) file type, size is 1.3MB.
These were printed with a 0.2mm nozzle, so if you are using a standard 0.4mm nozzle, I recommend scaling them to be larger.
These tokens can be a helpful reminder for new players that they have abilities, and only a certain number of said abilities.
| ActionSurge.stl | 383.5KB | |
| Blank.stl | 88.2KB | |
| BreathWeapon.stl | 664.9KB | |
| ChannelDivinity.stl | 357.9KB | |
| ChannelDivinityTriskele.stl | 348.8KB | |
| FourLeafClover.stl | 290.1KB | |
| Inspired.stl | 284.7KB | |
| Ki.stl | 152.6KB | |
| KiKanji.stl | 439.3KB | |
| Luck.stl | 157.7KB | |
| Plus1d10.stl | 188.6KB | |
| Plus1d12.stl | 174.5KB | |
| Plus1d4.stl | 142.9KB | |
| Plus1d6.stl | 197.2KB | |
| Plus1d8.stl | 203.8KB | |
| Rage.stl | 318.6KB | |
| SecondWind.stl | 380.7KB | |
| SorceryPoint.stl | 240.9KB | |
| SuperiorityDie.stl | 230.7KB | |
| TidesOfChaos.stl | 473.7KB | |
| WildShape.stl | 330.0KB |
