D&D 5e Condition Rings & Stand 3D Printer Model
The file 'D&D 5e Condition Rings & Stand 3D Printer Model' is (scad,stl) file type, size is 4.3MB.
The file 'D&D 5e Condition Rings & Stand 3D Printer Model' is (scad,stl) file type, size is 4.3MB.
I did a little bit of work on the excellent work conducted by @DM_Art and their SCAD file to make the rings printable in two colors.
Since you need so many of the things, I also decided to print a stand to hold up to five of each condition (14 in all). I even got a little fancy with some graphics on the stand.
The stand is pretty solid, so you won't have any issues with it breaking. It takes about 108 g of plastic.
| 0_ConditionRings-ND-Ver2.scad | 2.8KB | |
| 0_Ring.stl | 454.7KB | |
| 0_Stand-v2.stl | 4.5MB | |
| Black-Blinded.stl | 1.2MB | |
| Black-Unconcious.stl | 1.9MB | |
| Blue-Deafened.stl | 1.4MB | |
| Blue-Paralyzed.stl | 1.5MB | |
| Gray-Exhausted.stl | 1.9MB | |
| Gray-Incapacitated.stl | 2.2MB | |
| Green-Poisoned.stl | 1.4MB | |
| Orange-Grappled.stl | 1.5MB | |
| Orange-Restrained.stl | 1.9MB | |
| Purple-Charmed.stl | 1.4MB | |
| Purple-Petrified.stl | 1.7MB | |
| Red-Stunned.stl | 1.3MB | |
| White-Invisible.stl | 1.5MB | |
| Yellow-Frightened.stl | 1.9MB | |
| Yellow-Petrified.stl | 1.6MB |
